Specifications
| Model |
BC-4FB2 |
| Electrical requirements |
115V 60Hz 1-Phase 400 watts |
| Chamber
|
Dimensions: 48 x 23.5 x 26″ (WxDxH)
Material: 304 stainless steel
Power outlet with cover: four, < 500 watts
Water port x 1, stainless steel
Gas port x 1, stainless steel
Surface height from ground: 29.5″
Hanging bar: stainless steel, with 10 hooks |
| Lights |
LED lights: 18W x 2, > 1000 Lux
UV lights: 30W (Germicidal UV lamp, emission 253.7 nanometers)
* UV lights available only when front glass panel is fully closed.
* Recommended replacement interval: 600 hours |
| Air flow |
Volume
Inflow: 345 CFM (Cubic Feet per Minute)
Downflow: 500 CFM
Exhaust: 345 CFM
Speed
Inflow: 100-110 FPM (Feet per Minute)
Downflow: 60-70 FPM
Motor: 1/3 HP 9A
* 100% discharged from top vent (HEPA filtered)
* Air circulation available only when front glass panel is open |
| Top clearance |
12″ (recommended) |
HEPA (High-Efficiency
Particulate Air) filter |
Two, with 99.999% efficiency at 0.3 μm diameter
Filter hour indicator and life bar on controller
* Recommended replacement interval: 4,000 hours |
| Front safety panel |
Material: tempered safety glass (thickness > 5mm), dual-layer, laminated, UV blocking
Recommended opening height: 8″
Maximum opening height: 20.5″ |
| Material |
Chamber: 304 stainless steel
Main body: powder coated steel |
| Controller |
LCD screen with soft touch buttons and remote control |
| Noise |
< 65 dB(A) |
| Casters |
Four, with stationable feet |
Unit/shipping
weight & dimensions |
520 Lbs / 725 Lbs
54.5 x 30.5 x 90″ (fully assembled) / 61 x 43 x 76″ (WxDxH) |
| Safety |
Abnormal airflow alarm
Filter replacement alarm
Front glass panel unsafe height |
| Compliance |
NSF/ANSI 49 (C0559576) |
| Warranty |
One year |
Caution! Installation requires a forklift or a crane.
Attention! Steps before and after using the unit.
- Step 1: Fully close the front glass panel, turn on UV light for 30 mins (you can use the timer setting). Users should leave the room during this disinfection period.
- Step 2. Raise the glass panel to recommended opening height, turn on air circulation for 10 minutes.
- After operation is done, fully close the glass panel and turn on UV light for another 30 minutes for decontamination.
IMPORTANT GUIDELINES USING A BSC
- No flammable and explosive substances (Building up of flammable material may cause an internal fire or explosion)
- No volatile chemicals (May cause damage to HEPA filters to the point where it allows particles to leak through)
- No toxic chemicals or materials (May reach room occupants)
- No open flame (Will disrupts air flow patterns)
- Minimal use (10mL or less) of decontaminant, such as 70% isopropyl or ethyl alcohol is allowed.
- We recommend using the following for disinfecting the surfaces of a BSC, depending on the agent to be controlled: Sodium hypochlorite (bleach), Ilodophors (Wescodyne), Phenolics (Hilphene, Vespene) and Quaternary ammonium compounds (Conflikt, EndbacII)
- If gaseous, vaporized or aerosolized chemicals must be generated in a BSC, you should assure yourself that the quantity being generated will NOT cause a flammable or toxic risk.
